Post suggestions regarding RVGL.
- Site Admin
- Posts: 80
- Joined: Mon Dec 04, 2017 9:36 pm
Currently, it is possible to assign sounds to custom materials, but they can only be enabled by sliding or scraping against the surface. The option to always hear a sound while simply driving on the surface would be extremely useful for properly replicating surfaces such as gravel or pebbles.
- Posts: 305
- Joined: Thu Dec 07, 2017 9:04 pm
Yes, I fully support this suggestion. On the new Ranch-track, the custom sound when sliding on wood is a little bit strange, it would make more sense, if this would be persistent instead.
I also have this issues on my custom surfaces for Spa-Volt - especially at the wet surface at the outdoor area.
- Posts: 34
- Joined: Thu Dec 07, 2017 8:06 pm
Everything has already been said.
- Site Admin
- Posts: 195
- Joined: Mon Dec 04, 2017 6:45 pm
- Location: /home/marv
Yes! I've been wanting to do this for a while.
About how I'd implement this: A new MATERIAL entry in properties called SurfSound and a number for which wave you want to use. You can then put a custom sound in the custom folder and use its respective number.
E.g. siren_loop.wav would be 100. The list is available at https://docs.re-volt.io